CONFIGURACION ENRUTAMIENTO CON OSPF

CONFIGURACION DE ENRUTAMIENTO CON OSPF

CONFIGURACION BASICA DEL ROUTER 1
Router#en
Router#config t
Router(config)#hostname Berlin
Berlin(config)#line con 0
Berlin(config-line)#password cisco
Berlin(config-line)#login
Berlin(config-line)#line vty 0 15
Berlin(config-line)#login
Berlin(config-line)#exit
Berlin(config)#enable password cisco
Berlin(config)#enable secret class
Berlin(config)#exit
Berlin#copy running-config startup-config

CONFIGURACION DE LAS INTERFACES
Berlin#en
Berlin#config t
Berlin(config)#int serial 1/0
Berlin(config-if)#ip address 192.168.15.1 255.255.255.252
Berlin(config-if)#clock rate 56000
Berlin(config-if)#no shut
Berlin(config-if)#exit
Berlin(config)#int F0/0
Berlin(config-if)#ip address 192.168.1.129 255.255.255.192
Berlin(config-if)#no shut

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Berlin(config-if)#exit
Berlin(config)#exit
Berlin#copy running-config startup-config
Berlin#

CONFIGURACION DE ENRUTAMIENTO CON OSPF
Berlin#en
Berlin#config t
Berlin(config)#router ospf 1
Berlin(config-router)#network 192.168.1.128 0.0.0.63 area 0
Berlin(config-router)#network 192.168.15.0 0.0.0.3 area 0
Berlin(config)#end
Berlin#en
Berlin#show ip route
192.168.1.0/26 is subnetted, 1 subnets
C 192.168.1.128 is directly connected, FastEthernet0/0
192.168.15.0/30 is subnetted, 1 subnets
C 192.168.15.0 is directly connected, Serial1/0
Berlin#
00:24:02: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.15.2 on Serial1/0 from LOADING to FULL, Loading Done

CONFIGURACION DEL ROUTER 2

CONFIGURACION BASICA DEL ROUTER
Rome#en
Rome#config t
Rome(config)#line con 0
Rome(config-line)#password cisco
Rome(config-line)#login
Rome(config-line)#exit
Rome(config)#line vty 0 15
Rome(config-line)#login
Rome(config-line)#exit
Rome(config)#enable password cisco
Rome(config)#enable secret class
Rome(config)#exit
Rome#copy running-config startup-config
CONFIGURACION DE LAS INTERFACES
Rome#en
Rome#config t
Rome(config)#int serial 1/0
Rome(config-if)#ip address 192.168.15.2 255.255.255.252
Rome(config-if)#no shut
Rome(config-if)#
Rome(config-if)#exit
Rome(config)#int F0/0
Rome(config-if)#ip address 192.168.0.1 255.255.255.0
Rome(config-if)#no shut
Rome(config-if)#exit
Rome(config)#exit
Rome#copy running-config startup-config

CONFIGURACION DE OSPF
Rome#en
Rome#config t
Rome(config)#router ospf 1
Rome(config-router)#network 192.168.0.0 0.0.0.255 area 0
Rome(config-router)#network 192.168.15.0 0.0.0.3 area 0
Rome(config)#end
Rome#
00:23:54: %OSPF-5-ADJCHG: Process 1, Nbr 192.168.15.1 on Serial1/0 from LOADING to FULL, Loading Done
Rome#en
Rome#config t
Rome(config)#router ospf 1
Rome(config-router)#log-adjacency-changes
Rome(config-router)#end
Rome#copy running-config startup-config
Destination filename [startup-config]?
Rome#